TILE CUTTERS 3AK cm.50

TILE CUTTERS 3BK cm.60

TILE CUTTERS 3CK cm.72

TILE CUTTERS 3DK cm.90

TILE CUTTERS 3EK cm.128

“For the most demanding users”. Klick klock type, extremely effective, allows particularly thick or difficult materials to be easily cut, with the added advantage of measurement conveniently close to the operator. Broad tile support table. Double registration for regulation of cutting thickness.

The swivelling measurement bar supporting the tile rotates through 45° in both directions and is pivoted at the centre of the cutting line, allowing the real measurement of the piece to be cut to be obtained. A 45° a second measurement scale gives the length of the diagonal. Measurements are in centimetres, or inches on request. The rapid positioning button makes the main angles normally used immediately available. Easy to dismantle to ensure compact dimensions for easy transport.

KICK KLOCK CUTTING SYSTEM BY PUSHING: extremely strong, allows particularly thick or difficult materials to be easily cut, with the added advantage of measurement conveniently close to the operator. Cuts are made by pushing the grip fitted with an interchangeable large-diameter tungsten carbide wheel. Applied on tile cutters of the SERIE “3″ STANDARD and DIAGONALE ranges and interchangeable with the dragging grip.

Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made with structure in high-resistance aluminium alloy and steel in a wide range of models, also with accessories for diagonal cuts. The special shape of the grip allows tiles to be cut at any point. Movement on bearings, registration for recovery of wear on sides, plastic fitting to prevent marks beneath breaking feet. The lever grip is used to score the tile with a tungsten carbide wheel. The tile is then snapped by pressing with the breaking feet near the edge of the tile. Sigma offers three cutting systems, by dragging, pushing with klick klock and pushing only, which when applied to the different ranges of tile cutters are able to offer customers the maximum choice of professional high-quality products.

Tile cutter 3Acm.53 – 3AK cm.50 in case of transport

Tile cutter 3Bcm.63 – 3BK cm.60 in case of transport

Tile cutter 3C cm.75 – 3CK cm.72 in case of transport

	SERIE 3 klick klock Art. 3Ak - 3Bk - 3Ck - 3Dk – 3Ek
	SERIE DIAGONALE klick klock Art. 5Ak - 4Ak
Preparation. 45 ° cut  (3B)	Measurement. 45 ° cut  (3B)
Adjustment according to the thickness	KLICK KLOCK (old)  tile cut at 90 °
KLICK KLOCK (new)  tile cut at 90 °	KLICK KLOCK (old)  tile cut at 45 °
KLICK KLOCK tile cut at 90 ° AMAZON 16.5 X 100 (LA FAENZA)	KLICK KLOCK  cut at 90 ° GRAPHILAB 60×120 (GIGACER)
KLICK KLOCK  cut at 90 ° GREYBOC 60×120 (GIGACER)
KLICK KLOCK  cut at 90 ° polished porcelain tile, thickness 11 mm	KLICK KLOCK  cut at 90 ° rough porcelain tile, thickness 11 mm
KLICK KLOCK  cut at 90 ° PORCELAIN wrinkled, thickness 12 mm	KLICK KLOCK  cut at 90 ° KLINKER, thickness 20 mm
KLICK KLOCK  cut at 90 ° COTTO FIORENTINO, thickness 20 mm	KLICK KLOCK  cut at 90 ° COTTO NATURAL, thickness 30 mm

TILE CUTTER – INSTRUCTIONS FOR USE