TILE CUTTERS 5AK cm.48

TILE CUTTERS 4AK cm.71

Broad tile support table.  Double registration for regulation of cutting thickness. The swivelling measurement bar supporting the tile is pivoted at the centre of the cutting line, and rotates up to 48° to allow the real measurement of the piece to be cut to be obtained at any angle. A 45° a second measurement scale gives the length of the diagonal. Measurements are in centimetres, or inches on request. Easy to dismantle to ensure compact dimensions for easy transport.

KICK KLOCK CUTTING SYSTEM BY PUSHING: extremely strong, allows particularly thick or difficult materials to be easily cut, with the added advantage of measurement conveniently close to the operator. Cuts are made by pushing the grip fitted with an interchangeable large-diameter tungsten carbide wheel. Applied on tile cutters of the SERIE “3″ STANDARD and DIAGONALE ranges and interchangeable with the dragging grip.

Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made with structure in high-resistance aluminium alloy and steel in a wide range of models, also with accessories for diagonal cuts. The special shape of the grip allows tiles to be cut at any point. Movement on bearings, registration for recovery of wear on sides, plastic fitting to prevent marks beneath breaking feet. The lever grip is used to score the tile with a tungsten carbide wheel. The tile is then snapped by pressing with the breaking feet near the edge of the tile. Sigma offers three cutting systems, by dragging, pushing with klick klock and pushing only, which when applied to the different ranges of tile cutters are able to offer customers the maximum choice of professional high-quality products.

<!– @page { size: 21cm 29.7cm; margin: 2cm } P { margin-bottom: 0.21cm } H3 { margin-bottom: 0.21cm } –>

<!– @page { size: 21cm 29.7cm; margin: 2cm } P { margin-bottom: 0.21cm } –>

Tile cutter 5A cm.51 – 5AK cm.48 in case of transport

Tile cutter 5B cm.62 – 5BK cm.59 in case of transport

Tile cutter 4A cm.75 – 4AK cm.72 in case of transport

	SERIE DIAGONALE klick klock Art. 5Ak - 4Ak
Preparation. 45 ° cut  (3B)	Measurement. 45 ° cut  (3B)
Adjustment according to the thickness	KLICK KLOCK (old)  tile cut at 90 °
KLICK KLOCK (new)  tile cut at 90 °	KLICK KLOCK (old)  tile cut at 45 °
KLICK KLOCK tile cut at 90 ° AMAZON 16.5 X 100 (LA FAENZA)	KLICK KLOCK  cut at 90 ° GRAPHILAB 60×120 (GIGACER)
KLICK KLOCK  cut at 90 ° GREYBOC 60×120 (GIGACER)
KLICK KLOCK  cut at 90 ° polished porcelain tile, thickness 10 mm	KLICK KLOCK  cut at 90 ° structured porcelain tile, thickness 10 mm
KLICK KLOCK  cut at 90 ° PORCELAIN wrinkled, thickness 12 mm	KLICK KLOCK  cut at 90 ° KLINKER, thickness 15 mm
KLICK KLOCK  cut at 90 ° COTTO FIORENTINO, thickness 20 mm	KLICK KLOCK  cut at 90 ° COTTO NATURAL, thickness 30 mm

TILE CUTTER – INSTRUCTIONS FOR USE