Tile Cutters STANDARD
Tile cutters STANDARD whitout adjustment according to the thickness
TILE CUTTERS 7A
Model suitable for professional and amateur use, with rubber table covers and feet. No adjustment required for tile thickness. Unpainted version with fixed measurement.DRAGGING CUTTING SYSTEM: of maximum speed and precision, with measurement conveniently close to the operator.
Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made with structure in high-resistance aluminium alloy and steel in a wide range of models, also with accessories for diagonal cuts. The special shape of the grip allows tiles to be cut at any point. Movement on bearings, registration for recovery of wear on sides, plastic fitting to prevent marks beneath breaking feet. The lever grip is used to score the tile with a tungsten carbide wheel. The tile is then snapped by pressing with the breaking feet near the edge of the tile.
TILE CUTTERS 7F
Professional model with fixed measurement and sprung metal table. The scoring and snapping grip slides on bearings, and cuts different thicknesses without any need for adjustments. It has a register to reduce wear, and protections to avoid marking tiles.
DRAGGING CUTTING SYSTEM: of maximum speed and precision, with measurement conveniently close to the operator.
Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made with structure in high-resistance aluminium alloy and steel in a wide range of models, also with accessories for diagonal cuts. The special shape of the grip allows tiles to be cut at any point. Movement on bearings, registration for recovery of wear on sides, plastic fitting to prevent marks beneath breaking feet. The lever grip is used to score the tile with a tungsten carbide wheel. The tile is then snapped by pressing with the breaking feet near the edge of the tile.
Tile cutters STANDARD whit adjustment according to the thickness
TILE CUTTERS 6
TILE CUTTERS 5
TILE CUTTERS 5M Mosaic
Professional model with fixed measurement, sprung metal table and thickness adjustment register. The scoring and snapping grip slides on bearings, and it has a register to reduce wear, and protections to avoid marking tiles.
DRAGGING CUTTING SYSTEM: of maximum speed and precision, with measurement conveniently close to the operator.
Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made with structure in high-resistance aluminium alloy and steel in a wide range of models, also with accessories for diagonal cuts. The special shape of the grip allows tiles to be cut at any point. Movement on bearings, registration for recovery of wear on sides, plastic fitting to prevent marks beneath breaking feet. The lever grip is used to score the tile with a tungsten carbide wheel. The tile is then snapped by pressing with the breaking feet near the edge of the tile.
Tile cutters |
7A |
7F |
6 |
5 |
5M |
|
Characteristics |
um |
|||||
| Effective cutting length | cm | 33 | 37 | 35 | 50 | 50 |
| Diagonal cut | cm | 24×24 | 26×26 | 25×25 | 35×35 | 35×35 |
| Max. cutting thickness | mm | 15 | 15 | 16 | 16 | 16 |
| Net weight | kg | 1.7 | 2.3 | 4.6 | 7.2 | 7.5 |
| Carton of (x) items | kg | (6) 11.6 | (6) 15.3 | (4) 21.5 | (2) 16 | (2) 17 |
| Carton dimensions | cm | 54×43x32 | 54×43x32 | 83×55x28 | 73×42x29 | 73×42x29 |
<!– @page { size: 21cm 29.7cm; margin: 2cm } P { margin-bottom: 0.21cm } H3 { margin-bottom: 0.21cm } –>
Tile cutter 6 cm.35 in case of transport
Tile cutter 5 cm.51 – 5M cm.51 in case of transport
 |
Tile Cutters STANDARD |
| Adjustment according to the thickness | Tile cut at 90° 5M |
| Tile cut at 90° with STANDARD model | Serie 3 tile cut at 90 ° KERLITE Cotto D’Este |
TILE CUTTER – INSTRUCTIONS FOR USE
Recent Comments