WATER CUTTING MACHINE  9P cm. 42

Low weight and dimensions. Suitable for work of precision. Work table movement on bearings. Blade diameter 200 or 230 mm. Support bench available on request.

Suitable for cutting and bevelling all materials used in the construction trade. Their lightweight space-saving features make them easily transportable. The sheet steel structure is protected against corrosion by galvanization and painting with high-resistance epoxy paint. The sealed induction motor requires no maintenance. The switch is also sealed, and is fitted with a device protecting against restarting in case of power supply interruptions. Supplied complete with diamond blade; continuous-crown, but close-tooth and turbo blades can also be fitted according to the material and thickness to be cut. Consult the chart on page 17 to choose the right blade. (Only for Art. 9P 9M 10M 9D 9L). The rotating diamond blade is bather in water from the lower tank, depositing all dust produced during cutting. The tank containing cooling water and cutting wastes can be easily removed for rapid cleaning. Built to CE standards. Models with sliding table mounted on bearings are more practical and precise, allowing cutting and bevelling to be performed simultaneously at any tilt angle and/or diagonal angle on a wide range of workpieces. The swivelling measurement bar supporting the workpiece can also rotate up to 45° in both directions, and can be easily removed to allow workpieces of unlimited length to be cut.

.

	JOLLI SIGMA Art. 9P  2010 VERSION
Shipped assembled and calibrated ready	How to transport the cutter SIGMA on the 2nd floor
Preparing to Use the cutter personnel	Spindle start and stop
OTHER VIDEOS AVAILABLE AT THE END OF PAGE

.

.

WATER CUTTING MACHINE 9M1 cm. 55

-  9M6 cm. 52

Machine for professional use, for practical and convenient work on formats up to 50×50 cm and thicknesses up to 8.5 cm. Work table movement on bearings. Art. 9M1 available with 250 mm diameter blade and 1100 W motor , Art. 9M6 available with 300 mm diameter blade, 2200 W motor and stand Art. 63A. On request, Art. 9M1 can be supplied with 2200 W motor and 300 mm diameter blade and stand, in the configuration specified by customer. On both models an additional square can be fitted on the right (Art. 85G1), permitting guided cuts of unlimited length.

Suitable for cutting and bevelling all materials used in the construction trade. Their lightweight space-saving features make them easily transportable. The sheet steel structure is protected against corrosion by galvanization and painting with high-resistance epoxy paint. The sealed induction motor requires no maintenance. The switch is also sealed, and is fitted with a device protecting against restarting in case of power supply interruptions. Supplied complete with diamond blade; continuous-crown, but close-tooth and turbo blades can also be fitted according to the material and thickness to be cut. Consult the chart on page 17 to choose the right blade. (Only for Art. 9P 9M 10M 9D 9L). The rotating diamond blade is bather in water from the lower tank, depositing all dust produced during cutting. The tank containing cooling water and cutting wastes can be easily removed for rapid cleaning. Built to CE standards. Models with sliding table mounted on bearings are more practical and precise, allowing cutting and bevelling to be performed simultaneously at any tilt angle and/or diagonal angle on a wide range of workpieces. The swivelling measurement bar supporting the workpiece can also rotate up to 45° in both directions, and can be easily removed to allow workpieces of unlimited length to be cut.

.

	JOLLI SIGMA Art. 9M  2010 VERSION
WATER CUTTING MACHINE for building materials 85mm thick 550×500 Cuttings 9M SIGMA	Shipped assembled and calibrated ready
How to transport the cutter SIGMA on the 2nd floor	Preparing to Use the cutter personnel
Spindle start and stop
	OTHER VIDEOS AVAILABLE AT THE END OF PAGE

.

.

WATER CUTTING MACHINE 10M cm. 60

Also suitable for heavy work, fitted with a 2200 W motor and a 300 mm diameter blade. Work table movement on bearings. Support bench included. On request an additional square can be fitted on the right (art. 85G), permitting guided cuts of unlimited length.

Suitable for cutting and bevelling all materials used in the construction trade. Their lightweight space-saving features make them easily transportable. The sheet steel structure is protected against corrosion by galvanization and painting with high-resistance epoxy paint. The sealed induction motor requires no maintenance. The switch is also sealed, and is fitted with a device protecting against restarting in case of power supply interruptions. Supplied complete with diamond blade; continuous-crown, but close-tooth and turbo blades can also be fitted according to the material and thickness to be cut. Consult the chart on page 17 to choose the right blade. (Only for Art. 9P 9M 10M 9D 9L). The rotating diamond blade is bather in water from the lower tank, depositing all dust produced during cutting. The tank containing cooling water and cutting wastes can be easily removed for rapid cleaning. Built to CE standards. Models with sliding table mounted on bearings are more practical and precise, allowing cutting and bevelling to be performed simultaneously at any tilt angle and/or diagonal angle on a wide range of workpieces. The swivelling measurement bar supporting the workpiece can also rotate up to 45° in both directions, and can be easily removed to allow workpieces of unlimited length to be cut.

.

.

WATER CUTTING MACHINE 10M9 cm.

75   NEW VERSION 2010

Also suitable for heavy work, fitted with a 2200 W motor and a 300 mm diameter blade. Work table movement on bearings. Support bench included. On request an additional square can be fitted on the right (art. 85G), permitting guided cuts of unlimited length.

Suitable for cutting and bevelling all materials used in the construction trade. Their lightweight space-saving features make them easily transportable. The sheet steel structure is protected against corrosion by galvanization and painting with high-resistance epoxy paint. The sealed induction motor requires no maintenance. The switch is also sealed, and is fitted with a device protecting against restarting in case of power supply interruptions. Supplied complete with diamond blade; continuous-crown, but close-tooth and turbo blades can also be fitted according to the material and thickness to be cut. Consult the chart on page 17 to choose the right blade. (Only for Art. 9P 9M 10M 9D 9L). The rotating diamond blade is bather in water from the lower tank, depositing all dust produced during cutting. The tank containing cooling water and cutting wastes can be easily removed for rapid cleaning. Built to CE standards. Models with sliding table mounted on bearings are more practical and precise, allowing cutting and bevelling to be performed simultaneously at any tilt angle and/or diagonal angle on a wide range of workpieces. The swivelling measurement bar supporting the workpiece can also rotate up to 45° in both directions, and can be easily removed to allow workpieces of unlimited length to be cut.

.

.

	JOLLI SIGMA Art. 10M9  2010 VERSION
WATER CUTTING MACHINE for building materials 80mm thick 750×600 Mailed mounted balanced and ready for use	How to transport the cutter SIGMA on the 2nd floor
Preparing to Use the cutter personnel	Spindle start and stop
Cut at 90 ° porcelain	Cut 90 ° strip porcelain
Cut 45°  strip porcelain	45 ° bevel on porcelain
EXAMPLES OF CUTTING ON SPECIAL MATERIALS
Cutting along with cutter personnel	Cutting 90 ° glass with cutter personnel
Cutting 90 ° to concrete with cutter personnel	Cutting to concrete 8cm with cutter personnel
Cutting of perforated material 25×25 with cutter personnel	Cutting of perforated material on 45°cutter personnel
Cutting on granite with cutter personnel	90 ° Cutting brick  with cutter personnel
Cutting brick vertical with cutter personnel	Cutting concrete roofing tiles with cutter personnel
Cutting brick roofing tiles  with cutter personnel

.

.

	JOLLI SIGMA Art. 9P – 9M – 10M
Water tank assembly	90 ° cutting porcelain tile, thickness 15 mm
90 ° cutting granite, thickness 30 mm	90 ° cutting marbre, thickness 30 mm
Alignment cutting diagonally	45 ° cutting porcelain tile, thickness 15 mm
45 ° cutting marble, thickness 30 mm
Beveling on porcelain tile, thickness 15 mm	Beveling on marble, thickness 12 mm
Sliding carriage  JOLLI SIGMA	Disassembly for maintenance or transportation