Tile saws 9L

Easy to transport with the handle provided and lightweight construction, suitable for semi-professional use. Allows even large tiles to be cut and bevelled. Supplied complete with universal diamond-coated blade.

Suitable for cutting and bevelling all materials used in the construction trade. Their lightweight space-saving features make them easily transportable. The sheet steel structure is protected against corrosion by galvanization and painting with high-resistance epoxy paint. The sealed induction motor requires no maintenance. The switch is also sealed, and is fitted with a device protecting against restarting in case of power supply interruptions. Supplied complete with diamond blade; continuous-crown, but close-tooth and turbo blades can also be fitted according to the material and thickness to be cut. Consult the chart on page 17 to choose the right blade. (Only for Art. 9P 9M 10M 9D 9L). The rotating diamond blade is bather in water from the lower tank, depositing all dust produced during cutting. The tank containing cooling water and cutting wastes can be easily removed for rapid cleaning. Built to CE standards. Models with sliding table mounted on bearings are more practical and precise, allowing cutting and bevelling to be performed simultaneously at any tilt angle and/or diagonal angle on a wide range of workpieces. The swivelling measurement bar supporting the workpiece can also rotate up to 45° in both directions, and can be easily removed to allow workpieces of unlimited length to be cut.

Tile saws  9D1 -  9D6

Machine for professional use. The tile to be cut rests on the table and is guided during cutting by a robust tubular support with micrometric adjustment screws. This support can be removed to provide a totally free work surface for the cutting of particularly large tiles. Art. 9D1 available with 250 mm diameter blade and 1100 W motor, Art. 9D6 available with 300 mm diameter blade, 2200 W motor and stand Art. 63A. On request, Art. 9D1 can be supplied with 2200 W motor and/or 300 mm diameter blade and/or stand, in the configuration specified by customer.

Suitable for cutting and bevelling all materials used in the construction trade. Their lightweight space-saving features make them easily transportable. The sheet steel structure is protected against corrosion by galvanization and painting with high-resistance epoxy paint. The sealed induction motor requires no maintenance. The switch is also sealed, and is fitted with a device protecting against restarting in case of power supply interruptions. Supplied complete with diamond blade; continuous-crown, but close-tooth and turbo blades can also be fitted according to the material and thickness to be cut. Consult the chart on page 17 to choose the right blade. (Only for Art. 9P 9M 10M 9D 9L). The rotating diamond blade is bather in water from the lower tank, depositing all dust produced during cutting. The tank containing cooling water and cutting wastes can be easily removed for rapid cleaning. Built to CE standards. Models with sliding table mounted on bearings are more practical and precise, allowing cutting and bevelling to be performed simultaneously at any tilt angle and/or diagonal angle on a wide range of workpieces. The swivelling measurement bar supporting the workpiece can also rotate up to 45° in both directions, and can be easily removed to allow workpieces of unlimited length to be cut.

	JOLLI SIGMA Art. 9P – 9M – 10M
Water tank assembly	90 ° cutting porcelain tile, thickness 15 mm
90 ° cutting granite, thickness 30 mm	90 ° cutting marbre, thickness 30 mm
Alignment cutting diagonally	45 ° cutting porcelain tile, thickness 15 mm
45 ° cutting marble, thickness 30 mm	long cut
Beveling on porcelain tile, thickness 15 mm	Beveling on marble, thickness 12 mm
Sliding carriage  JOLLI SIGMA	Disassembly for maintenance or transportation